AF-S Teleconverter TC-17E II
June 1, 2004
AF-S Teleconverter TC-17E II -- Compact, lightweight and the first to offer 1.7x performance, the AF-S teleconverter TC-17E II adds further versatility to AF-S and AF-I lenses.
TOKYO - Nikon Corporation is pleased to announce the introduction of the AF-S Teleconverter TC-17E II - the first teleconverter to offer 1.7x performance. Designed exclusively for use with AF-S and AF-I lenses, the AF-S Teleconverter TC-17E II completes the Nikon lineup of 1.4x, 1.7x, and 2.0x compact teleconverters.
With dimensions of just 66 x 31.5mm (2.6 x 1.2 in.) and a weight of only 250g (8.8oz.)(approx.), the AF-S Teleconverter TC-17E II allows focal length to be extended by a factor of 1.7 times while retaining a sense of overall comfort in the hand. Many such teleconverters can also have a detrimental effect on the speed of the lens, however the AF-S Teleconverter TC-17E II makes available f-stops only 1.5 stops slower.
Teleconverters are ideal for adding photographic versatility without the high expense of an extra lens. Indeed just by carrying a single lens and a set of teleconverters comprising the TC-14E II, the TC-17E II and the TC-20E II, a photographer can experience a freedom of focal lengths normally only possible with four different lenses.
The AF-S Teleconverter TC-17E II also has the ability to communicate with the signals from most lenses. Furthermore, it supports the convenient Nikon Vibration Reduction (VR) function, has a design that is consistent with the current TC-14EII and TC-20EII, and Eco-Glass is also used.
AF-S Teleconverter TC-17E II Major Features
- Compatible with AF-S and AF-I lenses
- The body of the lens is only 31.5mm thick - just 7mm thicker than the TC-14EII
- Communicates with the signals from most lenses
- Supports the innovative Nikon VR function
- Minimal effect on f-number of 1.5 stops
- Adoption of Eco-Glass
- Design consistent with the current TC-14EII and TC-20EII
AF-S Teleconverter TC-17E II Specifications
| Maximum reproduction ratio | 1.7 |
|---|---|
| Lens construction | 7 elements in 4 groups |
| Dimensions (diameter x length) | Approx. 66 x 31.5mm (2.6 x 1.2 in.) (length measured mount to mount) |
| Weight | Approx. 250g (8.8oz.) |
| Included accessories | Front cap (BF-3A), Rear cap (LF-1), Soft case (CL-0715) |
- Specifications and equipment are subject to change without any notice or obligation on the part of the manufacturer. June 2004
- The information is current as of the date of publication. It is subject to change without notice.